Coolsculpting: Latest technology in fat removal without surgery

Coolsculpting Dr Antonio Garcia Hernandez

Coolsculpting is the latest cutting-edge technology for non-surgical fat removal, on a local, outpatient basis and with immediate return to normal daily life. It is an American company that is pioneer and discoverer of this technology.

There are several factors that differentiate this technology from existing ones: more than 12 years of experience, more than six million treatments carried out around the world in this time. It is the only equipment for the elimination of fat, which has more than 54 scientific studies published in the magazines of maximum impact. In addition, it is the only appliance of this type, which has all the health records. Coolsculpting has all the American FDA clearances and European certifications, both for the device and for all applicators.

How does Coolsculpting work?

It has 10 different heads to apply in different areas of the body. It has some applicators for the neck, for the lower arm area with a spectacular result. It also has applicators for the abdomen area, for the back area, for the cartridge belts, the inner knees, the inner thighs, etc.

How to eliminate fat without surgery

It is a device that is the same as liposculpture, that is, with which you do not lose weight. Its function is to sculpt the body like a liposculpture. The difference is that it is not necessary to go through the operating room, or wear a girdle for a month, and without the need for general or local anesthesia. This treatment not only does not require anesthesia, but it also allows the patient to immediately return to their workplace.

To avoid any complications and any secondary effects, the heads have different shapes: round, curved, etc. This means that they are heads that are adapted to each area, and perform different types of suction. With this, it has been achieved that the cold point is the same throughout the area, and maximum in the central area, which is the area where the fat that we want to destroy most accumulates.

Do you want to know more about Coolsculpting in Tenerife with the Dr. Antonio García?

Liposculpture without surgery

Most importantly, Coolsculpting has a factory-developed, exclusive-patent system called Control Freeze Detect. It is a detector that is located in the heads. If for any reason the process temperature is altered, which is usually between 35 and 45 minutes of application, the machine is turned off directly and automatically disconnected. The fat must be subjected to a temperature between four and six degrees. You cannot lower that temperature since lowering the temperature would produce an unwanted side effect. Therefore, this device ensures that if the temperature changes the machine stops.

In addition, if in the process of the 35-45 minutes the patient moves and for any reason the head applied in the area is detached a little, which will cause a temperature change at that moment the machine would also be disconnected. In these cases it would be necessary to apply the appliance again and have the necessary time to have it at the right temperature.